# LogIC

## LogIC is a petrophysical software for the analysis of NMR, image, sonic waveform and standard well-logging suites.

Logicom have developed LogIC software to perform in an operational setting where communicating answers, in an environment of urgency, is essential. It is developed by working geologists and petrophysicists, to meet their requirements in the real world of exploration and production. LogIC evolved with an emphasis on speed, flexibility and output quality. It is also a tool for developing and testing ideas, and communicating them effectively. This characteristic has made LogIC the perfect platform for developing NMR, image analysis and waveform sonic applications.

## LogIC Features

### Input facilities

- LIS format
- DLIS (RP66) format
- LAS and BIT format
- ASCII file decoding
- On-screen digitization of well-logs, graphs, cross-plot overlays, maps, and pictures
- Core data, RFT, DST, CST and directional survey (TVD) data loading from spreadsheets, ASCII files, or keyboard

DLIS and LIS tape/diskette reading include customisable data curve selection criteria, auto-store and batch facilities. Data files may also be output in LIS or DLIS format, and transferred to tape or diskette for distribution.

### Data Manipulation and Statistics

- Listing, merging and joining of data files
- Depth shifting of logs and cores (block and stretch-and-squeeze methods)
- Many single channel functions such as interpolation, cumulation, differentiation, normalisation, standardisation, translation, matching
- Interactive algebraic manipulation of all channel data
- Filtering, by moving average, median, modal and low-pass methods
- Single channel, bivariate, multivariate and robust multivariate statistical analysis
- Clluster analysis for automatic facies identification
- Fuzzy logic for log prediction (including permeability) and facies typing.

### Zonation and Analysis

Analysis is done on a zone-by zone basis. LogIC will define up to 500 zones in a single well. Each zone can be assigned different analysis parameters, providing the facility to process geologically complex sequences in one go. Each data level can be analysed by several methods in a single pass. Assigning different equations and methods offers the flexibility to compare and contrast interpretations with minimum effort. For example, LogIC is ideal for developing moving T2 cut-offs for improved Sw interpretation, and also for customising equations for better permeability predictions.

A basic philosophy of LogIC is that all the parameters, methods and plot definitions, used by the program, are stored in object oriented parameter files. This approach has a number of useful applications:

Once established, the parameters are stored, providing users with a quick way to change one or two parameters and, either rerun the analysis or re-make the plots. Parameter files are associated with a well. Specifying the well means that the data set, analyses and presentations are fully defined.

When a new well is drilled, methods and plot formats used on a nearby or analogous well can be quickly and effortlessly loaded for first pass analysis. In many cases the new data can be processed in minutes.

Instead of simply storing the analytical results, LogIC retains, in the parameter files, the means by which those results are obtained. This approach is both economical of disk space, and easier to track the processing strategy used for the well.

All standard, and many esoteric analytical methods for clay content, porosity and water saturation are available on LogIC. A multi-mineral option provides a complex mineralogy analysis using the matrix inversion method.

In addition to the standard analysis methods, users can customise existing equations, or add new ones, use the command interpreter. The command interpreter operates both in addition to, and independently of, the normal analysis. The command interpreter includes standard mathematical functions, conditional processing (IF statements) and access to many of the normal analysis procedures. In practice, the command interpreter allows users to perform virtually any analysis or data manipulation conceivable.

Analytical results are presented as continuous curves of porosity, water saturation, and other information. LogIC furnishes zone-by-zone summaries of net-pay, net-to-gross ratio, hydrocarbon pore volume, as well as averaged channel data over the entire zone, or over the net-sand and net-pay intervals. The zone summaries can be viewed on screen, printed as hardcopy, or made an integral part of log-plot presentation.

### Further facilities include:

- Automatic calculation of commonly used parameters such as Rw from SP, Rwa, m, n, and p, neutron density separation, apparent matrix density, transit time and neutron porosity and many others.
- Calculation of bottom-hole temperature and mud properties by various methods
- Environmental corrections for all common tools used by the leading logging contractors. Invasion corrections by tornado chart and other methods
- Sensitivity studies for investigation and graphical representation of the influence of changes in cutoff criteria and petrophysical parameters (such as Rw) on the analysis results
- Interactive analysis of conventional analysis, matrix inversion, pulsed neutron, permeability prediction and SW-Height functions - watch your results change on screen as you adjust parameters
- Computation of two-way-times from check-shot surveys or other data
- Analytical results may be mapped and contoured in LogIC’s quick-look mapping package
- Batch analysis and plotting provides the facility for processing an unlimited number of wells, without user interaction. A simple control file manages processing. Directives can be placed in the control file to modify petrophysical and other constants, so that extensive sensitivities can be run and plotted while the user pursues other activities.

#### Graphics and Log Plots

The quality of plotted output -principally log-plots, cross-plots, and cross-sections- is one of the most impressive aspects of LogIC. The principle features are:

#### Cross-plots:

- Histograms, scatter plots, density plots and line plots
- Z-axis (symbols) and c-axis (colour) allow 4 dimensional plotting
- Multiple y-axes
- Point discrimination
- Fully interactive definition, annotation and editing
- Regressions and set operations
- Interactive editing of petrophysical and lithological corner points
- Splom plots, which are a grid of cross-plots, to allow rapid assimilation of large amounts of complex data

#### Log-plots:

- Up to 50 tracks, and 200 curves of data
- Depth index may be any data channel, including measured depth, vertical depth and two-way time
- Display text channel data for scale independent annotation
- Scaled display of deviated and horizontal wells
- Comprehensive options for the display of geological zones and geological events (such as bio-stratigraphic data)
- Display of cored intervals, RFT and DST data. The full data also may be listed at the base of the plot
- Optional listings at the base of the plot of the analysis results, petrophysical data, analysis methods etc. - in fact all the data parameters in the analysis
- Incorporation in the plot of external image and text files

#### Collage

Collage is an editing and drawing module for the display up to 50 different well plots on one cross-section diagram. LogIC users can pick geological zones, and/or events, which may be tied across wells. Wells plots may be aligned on structural position or on geological boundaries. Numerous shading and annotation options provide a CAD-like flexibility which, allied with the powerful LogIC well plotting facilities, furnish a formidable tool for the geologist. Typical Collage plots range from cross-sections, designed to tell a simple story, to highly detailed plots for extensive comparisons between wells.

#### Contact and downloads

For more information please Contact Us, or visit the Downloads page for an evaluation copy of the software.